TL V6-3206cc 3.2L SOHC MFI (1998)
Valve Body: Service and Repair
Disassembly and Reassembly
DISASSEMBLY/REASSEMBLY
NOTE:
-
Clean all parts thoroughly in solvent or carburetor cleaner, and dry with compressed air.
-
Blow out all passages.
-
Do not let the check balls fall out of the main valve body when removing the main valve body.
-
Coat all parts with ATF before reassembly.
-
Replace the O-rings and filters.
-
Install the filters in the direction shown.
CAUTION: Do not use a magnet to remove the check balls; it may magnetize the balls.