TL AWD V6-3.7L (2010)
3. Remove the screws and the front center speaker (A).
4. Measure the resistance between terminals No. 1 and No. 2. There should be about 2 Ohms.
5. If the resistance is not as specified, replace the front center speaker.
Tweeter
SRS components are located in this area. Review the SRS component locations See: Restraint Systems/Air Bag Systems/Locations, and the precautions
and procedures See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service and Repair
before doing repairs or service.
1. Remove the A-pillar trim See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Interior Trim Removal/Installation -
Pillar Areas.
2. Release the hooks, and remove the tweeter (A).
