acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

All Technical Service Bulletins for Speaker:|10-027|Page 5289 > < All Technical Service Bulletins for Speaker:|10-027|Page 5287
Page 3
background image

3. Check the capacitor (B) condition. If any malfunction is found, replace the tweeter.

4. Measure the resistance between the tweeter (A) terminal No. 2 and the outside terminal of the capacitor. There should be about 6 Ohms.

5. If the resistance is not as specified, replace the tweeter.

Rear Speaker

1. Remove the rear shelf  See: Body and Frame/Interior Moulding / Trim/Rear Shelf/Service and Repair.

2. Remove the mounting bolt (A), then tilt the speaker forward to release the clips (B).

NOTICE
If you pull the speaker out too far from the rear bulkhead, you will damage the clips.

All Technical Service Bulletins for Speaker:|10-027|Page 5289 > < All Technical Service Bulletins for Speaker:|10-027|Page 5287