TL AWD V6-3.7L (2010)
3. Disconnect the 2P connector (C), and remove the rear speaker.
4. Measure the resistance between the terminals No. 1 and No. 2:
-
With navigation, there should be 2 Ohms.
-
Without navigation, there should be 4 Ohms.
5. If the resistance is not as specified, replace the rear speaker.
Rear Door Speaker (with ELS audio system)
1. Remove the rear door panel See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Rear Door Panel/Service and Repair/Rear Door
Panel Removal/Installation.
2. Remove the bolts (A), disconnect the 2P connector (B), and remove the speaker (C).
3. Measure the resistance between terminals No. 1 and No. 2. There should be about 2 Ohms.
4. If the resistance is not as specified, replace the rear door speaker.
Subwoofer
1. Remove the rear shelf See: Body and Frame/Interior Moulding / Trim/Rear Shelf/Service and Repair.