TL AWD V6-3.7L (2010)
7. Remove the door panel (A) with as little bending as possible to avoid creasing or breaking it.
1. Start at the bottom edge of the door panel, detach the clips (B) with a commercially available trim pad remover.
2. Detach the remaining clips (C).
3. Release the door panel from the metal clips (D) attached to the door glass inner weatherstrip.
4. Starting at the rear, pull out the door panel.
NOTE: The inner handle cable (E) and the latch cable (F) are connected to the inner handle (G). Do not pull the door panel up too far, or these cables
will be damaged.
8. While holding the door panel (A) away from the door, detach the clips by pulling out the inner handle (B), then remove the inner handle from the
door .
