TL AWD V6-3.7L (2010)
9. While holding the door panel (A) away from the door, disconnect the power window switch connector (B).
NOTE: If you are only removing the door panel, go to step 14. If you are doing further disassembly of the door panel, continue to step 10.
Inner handle removal
10. Disconnect the inner handle cable (A) and the latch cable (B) from the inner handle (C), then remove the handle.
1. Release the inner handle cable fasteners (D, E), then disconnect the inner handle cable.
2. Release the latch cable fastener (F), and remove the latch cable fastener (G) from the inner handle by pinching its tabs together.
NOTE: If the cable fasteners are damaged or stress-whitened, replace them with new ones.
