TL AWD V6-3.7L (2010)
Carpet: Service and Repair
Front Carpet Replacement
Front Carpet Replacement
Special Tools Required
-
KTC Trim Tool Set SOJATP2014
*Available through the Acura Tool and Equipment Program
SRS components are located in this area. Review the SRS component locations See: Restraint Systems/Air Bag Systems/Locations and the precautions
and procedures See: Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service and Repair before doing repairs or service.
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to damage, wrinkle or twist the carpet.
-
Be careful not to damage the dashboard or other interior trim pieces.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
-
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
1. Remove these items:
-
Front seats, both sides See: Seats/Service and Repair/Front Seat Removal/Installation
-
Kick panels, both sides See: Scuff Plate/Service and Repair
-
Driver's dashboard undercover See: Dashboard / Instrument Panel/Service and Repair/Driver's Dashboard Undercover Removal/Installation
-
Passenger's dashboard undercover See: Dashboard / Instrument Panel/Service and Repair/Passenger's Dashboard Undercover
Removal/Installation
-
Center console See: Console/Service and Repair/Removal and Replacement/Center Console Removal/Installation
-
Steering joint cover See: Steering and Suspension/Steering/Steering Column/Service and Repair/Steering Column Removal/Installation
-
Shift cable See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Shift Linkage/Shift Cable/Service and Repair
-
Shift lever bracket base See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Shifter A/T/Service and Repair/Removal and
Replacement/A/T Shift Lever Removal
2. Release the hooks (A), then remove the accelerator pedal clip (B).
3. While pushing down the return spring (A) with a flat-tip screwdriver, pull back the accelerator pedal (B) to release the hook (C).
