TL AWD V6-3.7L (2010)
-
Any damages around the grab handle holes (C) or sunvisor holes (D) in the headliner
-
Any cracks in the sunvisor stay base (E)
-
Any cracks in the sunvisor bracket cover (F)
-
Any bends or cracks in the sunvisor stay shaft (G)
-
Any cracks in the sunvisor base (H)
-
Any cracks or breakage in the vanity mirror base (I)
-
Any fastener bases (J), stiffeners (K), magnet (L), or clip bases (M) which have come off the headliner
-
When installing the grab handle, push on the handle against the bracket (N) until the clips (O) snap into place securely.
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Replace the removed cushion tape with new pieces.
-
Check that both sides of the headliner are securely attached to the body.
-
Make sure the headliner overlaps the trim pieces correctly See: Restraint Systems/Air Bag Systems/Service and Repair.
-
Be careful not to crease or damage the headliner when reinstalling it through the front passenger's door opening. Also be careful not to scratch
the body.
-
Push the clips and the hooks into place securely.