TL AWD V6-3.7L (2010)
6. Install the trim in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Push the clips and the hooks into place securely.
Rear Door Sill Area
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to bend or scratch the trim or the panels.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
1. Remove the rear seat cushion See: Seats/Service and Repair/Rear Seat Removal/Installation.
2. Release the hooks (A) and the tab (B) from the B-pillar lower trim (C), and pull up the rear door sill trim (D) by hand to detach the clips (E, F),
then remove the trim.
3. If necessary, pull up the rear side outer trim (G) to detach the clips (H), then remove the trim.
4. Remove the B-pillar lower trim See: Trim Panel/Service and Repair/Interior Trim Removal/Installation - Pillar Areas.
