TL AWD V6-3.7L (2010)
6. Pass the front seat belt lower anchor (A) out through a hole in the slider (B), then remove the B-pillar upper trim (C).
7. Install the trim in the reverse order of removal, and note these items:
-
If the clip (A) is damaged or stress-whitened, replace it with a new one.
-
If the side curtain airbag has deployed, replace the B-pillar upper trim, the B-pillar lower trim, and the clips on the trim with new parts See:
Restraint Systems/Air Bag Systems/Service and Repair.
-
To prevent the side curtain airbags from deploying improperly and possibly causing injury, inspect the trim and replace it with a new one if it