TL AWD V6-3.7L (2010)
-
Follow the C-pillar trim installation procedure carefully; improper installation could cause the side curtain airbag to deploy improperly and
possibly cause injury.
-
Put on gloves to protect your hands.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
-
Take care not to scratch the trim or the panels.
-
The upper clip (A) in the C-pillar trim (B) consists of a plastic grommet (C) and a metal pin (D). The grommet expanded by the pin secures it to
the body panel (E). The projection (F) on the pin will break during removal, so the upper clip must be replaced with a new one when the trim is
reinstalled.
1. Remove these items:
-
Rear seat-back See: Seats/Service and Repair/Rear Seat Removal/Installation
-
Rear door opening seal, as needed See: Scuff Plate/Service and Repair
2. Hit the upper clip (A) in the C-pillar trim (B) with a rubber mallet. Hitting the clip breaks the projections (C) on the pin (D) and pushes it into the
grommet (E) on the body (F).
NOTE: The upper clip must be replaced with a new one when the C-pillar trim is reinstalled.
