TL AWD V6-3.7L (2010)
Air Register: Service and Repair
Driver's Side Vent Removal/Installation
Driver's Side Vent Removal/Installation
Special Tools Required
-
KTC Trim Tool Set SOJATP2014
*Available through the Acura Tool and Equipment Program
NOTE:
-
Take care not to scratch the dashboard or the panels.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
1. Remove the driver's dashboard trim See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Driver's
Dashboard Trim Removal/Installation.
2. Remove the screw, and detach the clip securing the driver's side vent (A), then remove the side vent.
3. Install the side vent in the reverse order of removal, and note these items:
-
If the clip is damaged or stress-whitened, replace it with a new one.
-
Push the clip into place securely.
