TL AWD V6-3.7L (2010)
Air Register: Service and Repair
Passenger's Side Vent Removal/Installation
Passenger's Side Vent Removal/Installation
Special Tools Required
-
KTC Trim Tool Set SOJATP2014
*Available through the Acura Tool and Equipment Program
NOTE:
-
Take care not to scratch the dashboard or the panels.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
1. Remove the glove box See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair/Glove Box Removal/Installation.
2. Remove the screw (A) securing the duct (B) from the glove box opening. Remove the screws (C) securing the passenger's side vent (D).
3. Pull out passenger's side vent (A) to detach the clip, then remove the side vent.