TL AWD V6-3.7L (2010)
Suspension Strut / Shock Absorber: Overhaul
Front Damper/Spring Disassembly, Inspection, and Reassembly
Front Damper/Spring Disassembly, Inspection, and Reassembly
Exploded View
NOTE:
-
When compressing the damper spring, use a commercially available strut spring compressor (Branick MST-580A or Model 7200, or equivalent)
according to the manufacturer's instructions.
-
Refer to the Exploded View as needed during the following procedure.
Disassembly
1. Compress the damper spring, then remove the self-locking nut (A) while holding the damper shaft with a hex wrench (B). Do not compress the
damper spring more than is necessary to remove the self-locking nut.