TL AWD V6-3.7L (2010)
6. Tighten the No. 1 propeller shaft mounting nuts to the specified torque.
7. Install exhaust pipe B and the muffler See: Engine, Cooling and Exhaust/Exhaust System/Muffler/Service and Repair.
8. If you installed a new propeller shaft, test-drive the vehicle at 55 mph (88 km/h), and check for noise or vibration. If there is a noise or vibration,
rotate the propeller shaft 180 degrees from its current alignment with the rear differential companion flange, then recheck.
