acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Driver's Door Speaker Connector View|Page 7184 > < Driver's Door Speaker Connector View|Page 7182
Page 2
background image

Tweeter

SRS components are located in this area. Review the SRS component locations,  See: Restraint Systems/Air Bag Systems/Locations and the precautions
and procedures  See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service and Repair
before doing repairs or service.

1. Remove the A-pillar trim.  See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Interior Trim Removal/Installation -

A-Pillar Trim

2. Release the hooks, and remove the tweeter (A).

3. Check the capacitor (B) condition. If any malfunction is found, replace the tweeter.

4. Measure the resistance between the tweeter (A) terminal No. 2 and the outside terminal of the capacitor. There should be about 6 Ohms.

5. If the resistance is not as specified, replace the tweeter.

Rear Speaker

1. Remove the rear shelf.  See: Body and Frame/Interior Moulding / Trim/Rear Shelf/Service and Repair

2. Remove the mounting bolt, then tilt the speaker forward to release the front clips (A).

Driver's Door Speaker Connector View|Page 7184 > < Driver's Door Speaker Connector View|Page 7182