TL FWD V6-3.5L (2009)
Air Door Actuator / Motor: Service and Repair
Recirculation Control Motor Replacement
Recirculation Control Motor Replacement
Removal
1. Remove the passenger's dashboard undercover. See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Passenger's Dashboard Undercover Removal/Installation
2. Remove the glove box. See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair/Glove Box Removal/Installation
3. Remove the climate control unit. See: Control Assembly/Service and Repair/Climate Control Unit Removal/Installation
4. Disconnect the 7P connector (A) from the recirculation control motor (B). Remove the self-tapping screws and the recirculation control motor
from the blower unit.
Installation
1. Make sure the damper lever pins in the motor lever are visible through the holes.
2. While holding the recirculation control motor (A), install the self-tapping screws and connect the 7P connector (B).
3. Reinstall the climate control unit.
4. After installation, make sure the motor runs smoothly.