TSX L4-2.4L (2005)
Trunk / Liftgate Interior Trim Panel: Service and Repair
Trim Removal/Installation - Trunk Lid
Trim Removal/Installation - Trunk Lid
Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program.
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to bend or scratch the trim and panels.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
1. Remove the trunk lid protector (A).
1. Pull back the outside of the trunk lid protector to release the outside hook (B).
2. Slide the trunk lid protector to the outside, then release the hooks (C) to remove it.
2. Remove the clips (A, B), then remove the trunk lid trim (C).