TSX L4-2.4L (2005)
18. Drive an oil pan seal cutter between the oil pan and cylinder block.
19. Cut the oil pan seal by striking the side of the cutter to slide the cutter along the oil pan.
20. Remove the oil pan.
Oil Pan Installation
Special Tools Required
^
Engine hanger plate EQS00BRSX0
1. Remove old liquid gasket from the oil pan mating surfaces, bolts, and bolt holes.
2. Clean and dry the oil pan mating surfaces.
3. Apply liquid gasket, P/N 08718-0009, evenly to the cylinder block mating surface of the oil pan and to the inner threads of the bolt holes.
NOTE: Do not install the parts if 4 minutes or more have elapsed since applying liquid gasket. Instead, reapply liquid gasket after removing the
old residue.
4. Install the oil pan.
