TSX L4-2.4L (2005)
5. Remove the mounting bolts (A) from the brackets.
6. Remove the side curtain airbag assembly.
Installation
NOTE:
-
Installation of the side curtain airbag must be performed according to the precautions/procedures described at the beginning of the SRS.
-
If the airbag is frayed, or has only other visible damage, replace it. Do not attempt to repair an airbag.
-
When you install the airbag, make sure it is not twisted, and that it is not caught between the inflator bracket by the bracket bolts.
-
Make sure that the side curtain airbag inflator retainer is installed properly, otherwise the airbag could deploy improperly and cause damage or
injuries.