TSX L4-2.4L (2005)
1. Place the new side curtain airbag assembly on the side of the roof. Tighten the side curtain airbag mounting bolts (A).
2. Connect the side curtain airbag 2P connector (A) to the side curtain airbag subharness.
3. Reconnect the battery negative cable.
4. Connect the HDS to the DLC, and clear the DTCs.
5. After installing the side curtain airbag, confirm proper system operation: Turn the ignition switch ON (II); the SRS indicator should come on for
about 6 seconds and then go off.
6. Install all removed parts.
7. Confirm proper headliner/pillar trim overlap.