ZDX V6-3.7L (2010)
Auxiliary Input / Output Jack: Service and Repair
USB Adapter Control Unit Replacement (Without Navigation System)
USB Adapter Control Unit Replacement
Without Navigation System
1. Remove the center console See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal and Replacement/Center
Console Removal/Installation.
2. Remove the bolts (A) and the USB adapter control unit (B), then remove the bolts (C) and brackets (D) from the USB adapter control unit.
3. Install the USB adapter control unit in the reverse order of removal.
