ZDX V6-3.7L (2010)
Auxiliary Input / Output Jack: Service and Repair
USB Adapter Holder/Auxiliary Jack Assembly Replacement
USB Adapter Holder/Auxiliary Jack Assembly Replacement
1. Remove the center console See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal and Replacement/Center
Console Removal/Installation.
2. Remove the cover (A), and disconnect the USB adapter connector (B).
3. Carefully pull out the USB adapter holder/auxiliary jack assembly (C) from the center console box, then disconnect the 5P connector (D) and
remove the USB adapter cable connector (E).
4. Install the USB adapter holder/auxiliary jack assembly in the reverse order of removal.
