ZDX V6-3.7L (2010)
Front Door Panel: Service and Repair
Front Door Sash Inner Trim Replacement
Front Door Sash Inner Trim Replacement
NOTE: Take care not to scratch the door.
1. Remove the door panel See: Front Door Panel Removal/Installation.
2. Lower the glass fully.
3. Remove the front door sash inner trim (A).
1. Detach the clips fastening the trim.
2. Pull back along the outside edge of the trim to release the hook strip (B) from the door glass opening flange at the A-pillar area and the roof
area of the door sash.
3. Pull back along the outside edge of the trim to release the hook strip (C) from the door glass opening flange at the B-pillar area of the door
sash.
4. If necessary, remove the grommets (D) from the door panel.
4. Install the trim in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Push the clips and the hook strips into place securely.