acura Workshop Repair Guides

Acura ZDX V6-37L Workshop Service and Repair Manuals

Rear Door Latch|Service and Repair|Page 5324 > < Rear Door Exterior Handle|Service and Repair|Page 5320
Page 1
background image

Rear Door Latch: Service and Repair

Rear Door Latch Replacement

NOTE: Put on gloves to protect your hands.

1. Raise the glass fully.

2. Remove these items:

-

Door panel  See: Rear Door Panel/Service and Repair/Rear Door Panel Removal/Installation

-

Inner handle  See: Rear Door Panel/Service and Repair/Rear Door Panel Removal/Installation

-

Outer handle  See: Rear Door Handle/Rear Door Exterior Handle/Service and Repair

3. Remove the plastic cover (A) as needed.

1. Disconnect the power door lock actuator connector (B), and detach the harness clip (C).

2. Remove the rear plug cap (D).

3. Pass the cables (E) through the slits (F) in the plastic cover.

NOTE: If the plastic cover is damaged or torn, replace it with a new one.

4. Remove the bolt (A) and the collar (B) from the rear lower channel (C). Pull away the door weatherstrip (D) as needed, and remove the screw (E).

Rear Door Latch|Service and Repair|Page 5324 > < Rear Door Exterior Handle|Service and Repair|Page 5320