ZDX V6-3.7L (2010)
-
Do not apply body primer to any remaining old adhesive on the flange.
-
Be careful not to mix up the body and the glass primer applicators.
-
Never touch the primed surfaces with your hands.
13. Cut a "V" in the end of the nozzle (A) on the adhesive cartridge as shown.
14. Put the cartridge in a caulking gun, and run a continuous bead of the adhesive (A) around the lower rear window (B) along the edge of the glass
molding (C) as shown:
-
Use the printed dots (D) as a guide when you apply the adhesive to the corners of the lower rear window.
-
Apply the adhesive within 30 minutes after applying the glass primer. Make a slightly thicker bead at each corner.