ZDX V6-3.7L (2010)
19. Put the cartridge in a caulking gun, and run a continuous bead of the adhesive (A) to the upper rear window (B) along the edge of the rubber dams
(C) as shown:
-
Use the printed dots (D) as a guide when you apply the adhesive to the corners of the upper rear window.
-
Apply the adhesive within 30 minutes after applying the glass primer. Make a slightly thicker bead at each corner.
20. Hold the upper rear window with suction cups over the opening, align it with the alignment marks you made in step 14, and set it down on
adhesive. Lightly push on the upper rear window until its edges are fully seated on adhesive all the way around.
