acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Trunk / Liftgate Latch|Service and Repair|Page 5423 > < Power Trunk / Liftgate Hazard Sensor|Locations|Page 5419
Page 1
background image

Trunk / Liftgate Latch: Service and Repair

Tailgate Latch Replacement

NOTE:

-

Put on gloves to protect your hands.

-

If the tailgate latch cannot be unlocked by using the keyless entry transmitter or the inside/outside tailgate switches, remove the maintenance lid
(A) from the tailgate lower trim panel, then turn the emergency lever (B) clockwise as shown.

1. Do the battery terminal disconnection procedure  See: Starting and Charging/Battery/Service and Repair/Procedures.

2. Remove the tailgate lower trim panel  .

3. Detach the harness clip (A). Disconnect the power tailgate closer unit connectors (B), and remove the bolts (C, D) securing the tailgate latch (E).

4. Pull out the tailgate latch (A), then remove it.

Trunk / Liftgate Latch|Service and Repair|Page 5423 > < Power Trunk / Liftgate Hazard Sensor|Locations|Page 5419