ZDX V6-3.7L (2010)
Grille: Service and Repair
Front Bulkhead Cover Replacement
Front Bulkhead Cover Replacement
NOTE:
-
Take care not to scratch the front bumper or the body.
-
When prying with a flap-tip screwdriver, wrap it with protective tape to prevent damage.
1. Remove the front bulkhead cover (A).
1. Detach the clips.
2. Pass the hood latch knob (B) through the hole in the cover.
2. Install the cover in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Push the clips into place securely.
