ZDX V6-3.7L (2010)
2. Release the Velcro fastener (B) on the front edge of the carpet, then pull back the carpet from under the dashboard.
3. Pull the floor wire harnesses (C) out through the slits (D).
6. If necessary, release the hook (A) that is just under the arrow mark (B) on the floor mat holder (C) by prying up on the holder with a flat-tip
screwdriver, and remove the holder through the slit (D) in the carpet (E).
7. If necessary, detach the clip, then remove the carpet spacer (A).
