ZDX V6-3.7L (2010)
Parking Brake Pedal: Service and Repair
Parking Brake Pedal Replacement
1. Remove the driver's dashboard undercover See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Driver's Dashboard Undercover Removal/Installation.
2. Remove the driver's side kick panel See: Body and Frame/Interior Moulding / Trim/Scuff Plate/Service and Repair.
3. Release the parking brake pedal.
4. Disconnect the parking brake switch connector (A) from the parking brake switch, and remove the harness clip (B).
5. Remove the parking brake pedal bracket mounting bolt (C) and nuts (D).
6. Remove the parking brake adjusting nut (E) and the cable clip (F).
7. Disconnect the parking brake cable from the parking brake pedal assembly (G), and remove the parking brake pedal assembly.
8. Remove the screw (A) from the parking brake switch (B) align the hole (C) with the screw by pressing the parking brake pedal.
9. Install the parking brake pedal assembly in the reverse order of removal, and note there items:
