ZDX V6-3.7L (2010)
4. Apply a thin coat of Molykote 44MA grease to the shoe ends and strut ends (A), sliding surfaces (B), and opposite edges of the parking brake shoe
(C) as shown. Wipe off any excess. Keep the grease off the brake linings.
5. Install the tension pin (A), the retainer spring (B), and the retainer (C) on the rearward brake shoe (D). Make sure the tension pin does not contact
the parking brake lever.
6. Install connecting rods A and B on the adjuster nut (C).
NOTE:
