ZDX V6-3.7L (2010)
Air Door Actuator / Motor: Service and Repair
Driver's Mode Control Motor Replacement
Driver's Mode Control Motor Replacement
1. Remove the driver's dashboard undercover See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Driver's Dashboard Undercover Removal/Installation.
2. Disconnect the 7P connector (A) from the driver's mode control motor (B). Remove the self-tapping screws and the driver's mode control motor
from the heater unit.
3. Install the motor in the reverse order of removal. Make sure the pin on the motor is properly engaged with the linkage. After installation, make
sure the motor runs smoothly.
