ZDX V6-3.7L (2010)
4. Remove the B-pillar upper/lower trim See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar Trim/Interior Trim
Removal/Installation - Pillar Areas.
5. Remove the upper anchor bolt (A).
6. Disconnect the seat belt tensioner connector (A) and the E-pretensioner motor connector (B) (with ACC). Remove the upper retractor mounting
bolt (C) and the lower retractor bolt (D), then remove the front seat belt (E) and the retractor (F).
7. Remove the shoulder anchor adjuster (A).
