ZDX V6-3.7L (2010)
8. Install the seat belt in the reverse order of removal, and note these items:
-
Check that the retractor locking mechanism functions See: Testing and Inspection.
-
Assemble the washer, the collars, and the bushing on the upper anchor bolt and the lower retractor bolt as shown.
-
Apply medium strength liquid thread lock to the upper anchor bolt before reinstallation.
-
Tighten the bolts by hand first, then tighten to the specified torque.
-
Before installing the anchor bolts, make sure there are no twists or kinks in the seat belt.
-
Make sure the seat belt tensioner connector is plugged in properly.
-
Do the battery terminal reconnection procedure See: Starting and Charging/Battery/Service and Repair/Procedures.
Front Seat Belt Buckle
