ZDX V6-3.7L (2010)
Seat Belt: Service and Repair
Rear Seat Belt Replacement
Rear Seat Belt Replacement
Rear Seat Belt
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to tear or damage the seat covers.
-
Check the rear seat belts for damage See: Testing and Inspection, and replace them if necessary.
1. Remove the rear seat cushion See: Body and Frame/Seats/Service and Repair/Rear Seat Removal/Installation.
2. Remove the lower anchor bolt (A).
3. Remove these items:
-
Quarter pillar trim See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar Trim/Interior Trim
Removal/Installation - Pillar Areas
-
Rear side trim panel See: Body and Frame/Seats/Service and Repair/Rear Seat Removal/Installation
4. Remove the rear seat belt (A) and the retractor (B).
1. Remove the upper anchor bolt (C).
2. Remove the retractor mounting bolt (D), and the retractor bolt (E).