ZDX V6-3.7L (2010)
5. Install the seat belt and the retractor in the reverse order of removal, and note these items:
-
Check that the retractor locking mechanism functions See: Testing and Inspection.
-
Assemble the washer, the collar, and the bushing on the upper anchor bolt as shown.
-
Apply medium strength liquid thread lock to the upper anchor bolt before reinstallation.
-
Before installing the anchor bolt, make sure there are no twists or kinks in the seat belt.
Center Seat Belt and Seat Belt Buckles
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to tear or damage the seat covers.
-
Check the center seat belts for damage See: Testing and Inspection, and replace them if necessary.
1. Remove the rear seat cushion See: Body and Frame/Seats/Service and Repair/Rear Seat Removal/Installation.
2. Remove the center anchor bolts (A), then remove the right seat belt buckle (B), the center seat belt buckle (C), and the left seat belt buckle (D).