ZDX V6-3.7L (2010)
2. Install the bolt (A) securing the harness holder (B).
3. Connect the A/C compressor clutch connector (C) to the A/C compressor.
4. Connect the alternator connector (D) and the positive alternator cable (E) to the alternator. Make sure the crimped side of the ring terminal faces
away from the alternator when you connect it.
5. Install the drive belt See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair.
6. Install the A/C condenser fan shroud assembly See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Radiator and A/C
Condenser Fan, Motor, and Shroud Removal and Installation.
7. Do the battery terminal reconnection procedure See: Battery/Service and Repair/Procedures.