ZDX V6-3.7L (2010)
Suspension Spring ( Coil / Leaf ): Removal and Replacement
Rear Spring/Bump Stop Removal/Installation
Rear Spring/Bump Stop Removal/Installation
Exploded View
NOTE: Refer to the Exploded View as needed during the following procedure.
Removal
1. Raise and support the vehicle See: Wheels and Tires/Vehicle Lifting/Service and Repair.
2. Remove the rear wheel.
3. Remove the flange nut (A) while holding the joint pin (C) with a hex wrench (D), and disconnect the stabilizer link (E) from lower arm B.