ZDX V6-3.7L (2010)
Axle Shaft Assembly: Overhaul
Intermediate Shaft Reassembly
Intermediate Shaft Reassembly
Exploded View
Special Tools Required
-
Bearing Driver Attachment, 52 x 55 mm 07746-0010400
-
Driver Handle, 15 x 135L 07749-0010000
-
Fork Seal Driver, 39.2 x 49.5 x 15 mm 07947-4630100
-
Support Base 07965-SD90100
-
Installer Attachment 40 mm 07LAD-PW50601
-
Support Base Attachment 07LAF-SM40300
NOTE: Refer to the Exploded View, as needed, during this procedure.
1. Clean the disassembled parts with solvent, and dry them with compressed air.