Manual diagnosis (page 3 of 9)
- Make
- Alfa Romeo
- Model
- 145/146 Electrical System Diagnosis Manual, Volume 3
- Year
- 1994–2001
- Section
- Anti Theft device
146 electrical system diagnosisManual diagnosis · page 3 of 9
| CHECK WARNING LED (D31) | TEST B | ||
|---|---|---|---|
| TEST PROCEDURE | RESULT | CORRECTIVE ACTION | |
| B1 | CHECK LED – Disconnect led D31 and check that it is working (applying for example, 5 V at the terminals) | OK | Carry out step B2 |
| NOT OK | Change the led D31 | ||
| B2 | CHECK CONTINUITY – Check continuity between: - one of the terminals of led D31 and earth G106 - the other terminal of led D31 and pin A1 of control unit N45 | OK | Change the control unit N45 |
| NOT OK | Restore the wiring between: - D31 and earth G106 - D31 and pin A1 of N45 | ||
| CHECK RH FRONT DOOR CONTACT (P10) | TEST C | ||
|---|---|---|---|
| TEST PROCEDURE | RESULT | CORRECTIVE ACTION | |
| C1 | CHECK DOOR LOCKING DEVICE – Check that the door locking device is working properly, with regard to the RH front door | OK | Carry out step C2 |
| NOT OK | Follow the instructions in FAULT-FINDING in the section "DOOR LOCKING SYSTEM" | ||
| C2 | CHECK EARTH – With the door open, check for 0 V (earth at pin B9 of anti- theft control unit N45 | OK | Change the control unit N45 |
| NOT OK | Restore the wiring between pin B9 of control unit N45 and door lock P10 | ||
Parts & tools for this job For 1994 Alfa Romeo 145/146
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.