Workshop Manuals Factory service & repair Alfa Romeo
01 Introduction and contents02 Technical data and maintenance03 Engine04 Clutch05 Gearbox06 Front axle and drive shafts07 Brakes08 Steering09 Suspension and wheels10 Heating and ventilation11 Bodywork12 Timing belt data sheets
Alfa Romeo 145/146 Factory Service Manual (1994-1999)03 · Engine
03 · Engine

Inertial switch

Make
Alfa Romeo
Model
145/146 Factory Service Manual
Year
1994–1999
Section
Electrical - electronic components (1970 T. SPARK 16V) › Inertial switch
EngineInertial switch
  1. Slacken the two fastening screws and remove the timing variator solenoid.
  2. Remove the valve complete with the timing variator spring.
Timing variator solenoid 1 and valve with spring 2

INERTIAL SWITCH

See 1712 16V Boxer engine.

SPEEDOMETER SENSOR

REMOVAL/REFITTING

  • Set the car on a lift.
  • Disconnect the battery (-) terminal.
  1. Disconnect the electrical connection of the speedometer sensor.
  2. Raise the car and using wrench no. 1.822.161.000, slacken and remove the speedometer sensor.
Speedometer sensor 2 removed with wrench 1.822.161.000, with electrical connection 1

Parts & tools for this job For 1994 Alfa Romeo 145/146

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.