Group 00 - Engine maintenance
- Make
- Alfa Romeo
- Model
- 145/146 Factory Service Manual
- Year
- 1994–1999
- Section
- Torque wrench settings › Group 00 - Engine maintenance
Technical data and maintenanceGroup 00 - Engine maintenance
THE FOLLOWING TORQUE WRENCH SETTINGS REFER TO JOIN/DISJOIN OPERATIONS OF 1910 JTD MOTORIZATION, FOR THOSE OF “ENGINE OVERHAULING” REFER TO PAGE 41
Group 00 - Engine maintenance
| Part | Nm | kgm |
|---|---|---|
| Clamping screws of driving shaft pulley | 21 ÷ 26 | 2.1 ÷ 2.7 |
| Clamping nut of driving belt tightener | 43 ÷ 53 | 4.4 ÷ 5.4 |
Group 10 - Engine
| Part | Nm | kgm | |
|---|---|---|---|
| Clamping nuts of half shafts | 36 ÷ 44 | 3.6 ÷ 4.5 | |
| Clamping nuts of the righthand shock absorber to the wheel post | 67 ÷ 74 | 6.8 ÷ 7.5 | |
| Clamping screws of the middle half shaft | 8 ÷ 10 | 0.8 ÷ 1.0 | |
| Oil discharge cover of gearbox/differential | 16 ÷ 26 | 1.6 ÷ 2.7 | |
| Clamping screws of the gearbox/differential group to the engine | M10 | 37 ÷ 45 | 3.8 ÷ 4.6 |
| M12 | 68 ÷ 84 | 6.9 ÷ 8.5 | |
| Clamping screws of clutch group | 19 ÷ 23 | 1.9 ÷ 2.3 | |
| Clamping screws of the driving shaft pulley | 21 ÷ 26 | 2.1 ÷ 2.7 | |
| Temperature sensor of the engine cooling fluid | 17 ÷ 21 | 1.7 ÷ 2.1 | |
| Joints of pressure pump pipes to the fuel manifold - manifold's side/pressure pump's side | 26 ÷ 32 | 2.7 ÷ 3.3 | |
Group 10 - Feed engine
| Part | Nm | kgm |
|---|---|---|
| Clamping screws of the driving shaft pulley | 21 ÷ 26 | 2.1 ÷ 2.7 |
| Clamping nut of the tightener of the driving belt | 43 ÷ 53 | 4.4 ÷ 5.4 |
| Joints of pressure pump pipes to the fuel's manifold - manifold's side/pressure pump side | 26 ÷ 32 | 2.7 ÷ 3.3 |
| Clamping nuts of the pressure pump | 26 ÷ 32 | 2.7 ÷ 3.3 |
| Clamping nut of the control pulley and pressure pump | 43 ÷ 53 | 4.4 ÷ 5.4 |
| Pipes joints of the fuel manifold to electroinjectors - electroinjector's side/manifold's side | 19 ÷ 23 | 1.9 ÷ 2.3 |
| Electroinjectors' clamping nuts | 26 ÷ 32 | 2.7 ÷ 3.3 |
| Fuel temperature sensor | 13 ÷ 16 | 1.3 ÷ 1.6 |
| Clamping nuts of the multistage centrifugal blower ( turbosupercharger) | 21 ÷ 26 | 2.1 ÷ 2.7 |
Parts & tools for this job For 1994 Alfa Romeo 145/146
- PARTEngine gasket setSearch: Alfa Romeo 145/146 1994 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.