Rear wheel hubs – construction features
- Make
- Alfa Romeo
- Model
- 147 Factory Service Manual
- Year
- 2000–2002
- Section
- Hubs and wheels › Rear wheel hubs – construction features
‹ Prev Rear wheel hubs – specifications:Next › Front wheel geometry - check using optical equipment - includes front wheel tow-in adjustment if necessary
Suspension and wheelsRear wheel hubs – construction features
Rear wheel hubs – construction features
The rear wheel hubs consist of an outer wheel fixing flange and a wheel bearing. The hubs are attached to the suspension stub axle pins by nuts with a safety crown. The outer flange also acts as an outer cage for the bearing. A multi-pole magnetic
ring is fitted to the hub's outer flange. Its function is to indicate wheel movement to the active sensor of the ABS 3340 ( Characteristic of working principle 3340
Anti-lock brake system (abs)).
When dismantling, ALWAYS use a new nut to secure the hub and stake the crown.
‹ Prev Rear wheel hubs – specifications:Next › Front wheel geometry - check using optical equipment - includes front wheel tow-in adjustment if necessary
Parts & tools for this job For 2000 Alfa Romeo 147
- PARTRear wheel bearingSearch: Alfa Romeo 147 2000 rear wheel bearing
- TOOLBearing puller kitSearch: wheel bearing puller kit
- PARTCV boot kitSearch: Alfa Romeo 147 2000 cv boot kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.