Workshop Manuals Factory service & repair Alfa Romeo
01 General data and specifications02 Engine (Twin Spark, JTD and V6)03 Clutch04 Gearbox (manual, Selespeed and Q-System)05 Front axle06 Brakes, ABS and traction control07 Steering08 Suspension and wheels09 Heating, air conditioning and washers10 Electrical equipment11 Body12 Body panels and reinforcement13 Wiring diagrams14 Connectors and pin-outs15 Wiring harnesses16 Fault diagnosis17 Special tools
Alfa Romeo 156 Factory Service Manual (1997-2002)16 · Fault diagnosis
16 · Diagnostics

D35 Low engine low pressure

Make
Alfa Romeo
Model
156 Factory Service Manual
Year
1997–2002
Section
Engine › D35 Low engine low pressure
Fault diagnosisD35 Low engine low pressure

D35 Low engine low pressure

The warning light indicate a decrease in the engine oil pressure.

StepTest procedureResultAction
0PRELIMINARY CHECKS

Preliminarily check:

  • engine oil level
  • engine coolant level

Check that the type of oil is suitable for the engine in question

OK

Move onto step 1

Engine oil level too low

End of diagnosis

Engine coolant level

End of diagnosis

Oil unsuitable
  • Top up with correct type of oil

End of diagnosis

1ENGINE OIL TYPE AND FILTER CHECK

Check that the engine oil is the recommended type in the correct quantity

Check that the oil filter is the recommended type and that it is correctly fitted

OK

Move onto step 2

Engine oil unsuitable
  • Change the engine oil

End of diagnosis

Oil filter unsuitable or incorrectly fitted

End of diagnosis

2OIL PUMP CHECK

Check the condition of the oil pump.

In particular, check:

  • condition and cleanliness of oil pressure relief valve
  • condition of spring
OK

Move onto step 3

Oil pump damaged or distorted Pressure relief valve damaged

End of diagnosis

3LUBRICATION SYSTEM CHECK

Carry out a general check on the lubrication system Op. 0510C20

OK

Move onto step 4

Faults in the lubrication system
  • Restore the lubrication system

End of diagnosis

4MAIN/BIG END BEARINGS CHECK

Overhaul the engine: in particular, check the condition of the crankshaft and big end bearings (see ENGINE OVERHAUL, Subassembly 1028)

OK

Move onto step 5

Main and big end bearings faulty

End of diagnosis

5CHECK CORRECT OPERATION

Check that the fault is no longer present

OK

End of diagnosis

Fault persists

Incorrect selection of diagnostic procedure

Parts & tools for this job For 1997 Alfa Romeo 156

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.