Workshop Manuals Factory service & repair Alfa Romeo
01 General data and specifications02 Engine (Twin Spark, JTD and V6)03 Clutch04 Gearbox (manual, Selespeed and Q-System)05 Front axle06 Brakes, ABS and traction control07 Steering08 Suspension and wheels09 Heating, air conditioning and washers10 Electrical equipment11 Body12 Body panels and reinforcement13 Wiring diagrams14 Connectors and pin-outs15 Wiring harnesses16 Fault diagnosis17 Special tools
Alfa Romeo 156 Factory Service Manual (1997-2002)16 · Fault diagnosis
16 · Diagnostics

I01 Side lights/number plate lights not working

Make
Alfa Romeo
Model
156 Factory Service Manual
Year
1997–2002
Section
Lights › I01 Side lights/number plate lights not working
Fault diagnosisI01 Side lights/number plate lights not working

I01 Side lights/number plate lights not working

With the ignition key in the ON position, when the steering column switch unit ring nut is operated, the side lights or the number plate lights do not work and this fault is indicated by the light failure warning light.

StepTest procedureResultAction
0PRELIMINARY CHECKS

Check the oepration of the light check device. If the side lights or number plate lights do not work, the light failure warning light comes on.

OK

Move onto step 1

The fault is not indicated by the light failure warning light.

Move onto step (see I30)

1CHECK INDIVIDUAL LIGHTS

Check the condition of the individual bulbs and the bulb holder assembly

OK

Move onto step 2

Bulbs damaged
  • Replace bulbs

End of diagnosis

Rear lights cluster faulty

End of diagnosis

Front lights cluster faulty

End of diagnosis

No. plate lights faulty

End of diagnosis

2SIDE LIGHTS ELECTRICAL CIRCUIT CHECK
  • connections between the ignition switch and the stalk unit
  • the connection between the stalk unt and the rev counter
  • connections between the rev counter and bulbs
  • bulbs earth

(Wiring diagram E2010 SIDE LIGHTS / NUMBER PLATE ).

OK

Move onto step 3

Connections broken
  • Restore the connections (

End of diagnosis

3STEERING COLUMN SWITCH UNIT CHECK

Check the stalk unit is working properly: in particular, check the side light switch see DESCRIPTION AND OPERATION: 5550A Stalk unit (see 5550AF)

OK

Move onto step 4

Stalk unit not working properly

End of diagnosis

4CHECK IGNITION SWITCH

Check that the side lights come on when the ignition key is turned in the opposite direction

OK

Move onto step 5

Ignition switch faulty

End of diagnosis

5CHECK CORRECT OPERATION

Check that the fault is no longer present

OK

End of diagnosis

Fault persists

Incorrect selection of diagnostic procedure

Parts & tools for this job For 1997 Alfa Romeo 156

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.