Workshop Manuals Factory service & repair Alfa Romeo
01 General data and specifications02 Engine (Twin Spark, JTD and V6)03 Clutch04 Gearbox (manual, Selespeed and Q-System)05 Front axle06 Brakes, ABS and traction control07 Steering08 Suspension and wheels09 Heating, air conditioning and washers10 Electrical equipment11 Body12 Body panels and reinforcement13 Wiring diagrams14 Connectors and pin-outs15 Wiring harnesses16 Fault diagnosis17 Special tools
Alfa Romeo 156 Factory Service Manual (1997-2002)16 · Fault diagnosis
16 · Diagnostics

S11 Engine droning

Make
Alfa Romeo
Model
156 Factory Service Manual
Year
1997–2002
Section
Noise/vibrations › S11 Engine droning
Fault diagnosisS11 Engine droning

S11 Engine droning

There is a constant, loud noise coming from the area of the engine, which is only heard within a certain engine speed range

StepTest procedureResultAction
0PRELIMINARY CHECK

Check the condition and seal of the air supply circuit

OK

Move onto step 1

Circuit component damaged
  • Replace the component (see Assembly 1048A)

End of diagnosis

1ENGINE SUPPORT CHECK

Check the condition and the correct fixing of the engine supports and flexible mountings and the reaction rods

OK

Move onto step 2

Engine supports faulty
  • Bed in the fixings: loosen the bolts, centre them in their housings and tighten them to the recommended torque (see Assembly 1008A)

End of diagnosis

Flexible mountings faulty
  • Bed in the fixings: loosen the bolts, centre them in their housings and tighten them to the recommended torque (see Assembly 1008B)

End of diagnosis

Reaction rod faulty
  • Bed in the fixings: loosen the bolts, centre them in their housings and tighten them to the recommended torque (see Assembly 1008C)

End of diagnosis

2ENGINE EXHAUST CHECK

Check the condition and the correct fixing of the engine exhaust pipe flexible supports

OK

Move onto step 3

Support slack or damaged
  • Restore or replace the support (see Assembly 1076A)

End of diagnosis

Pipe, silencer or connector damaged
  • Replace the components (see Assembly 1076B)

End of diagnosis

3CHECK CORRECT OPERATION

Check that the fault is no longer present

OK

End of diagnosis

Fault persists

Incorrect selection of diagnostic procedure

Parts & tools for this job For 1997 Alfa Romeo 156

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.