Workshop Manuals Factory service & repair Alfa Romeo
01 General data and specifications02 Engine (Twin Spark, JTD and V6)03 Clutch04 Gearbox (manual, Selespeed and Q-System)05 Front axle06 Brakes, ABS and traction control07 Steering08 Suspension and wheels09 Heating, air conditioning and washers10 Electrical equipment11 Body12 Body panels and reinforcement13 Wiring diagrams14 Connectors and pin-outs15 Wiring harnesses16 Fault diagnosis17 Special tools
Alfa Romeo 156 Factory Service Manual (1997-2002)16 · Fault diagnosis
16 · Diagnostics

S21 Gearbox noise at pick-up

Make
Alfa Romeo
Model
156 Factory Service Manual
Year
1997–2002
Section
Noise/vibrations › S21 Gearbox noise at pick-up
Fault diagnosisS21 Gearbox noise at pick-up

S21 Gearbox noise at pick-up

With the engine running, when the various gears are engaged, there is a noise during take-off: the noise varies as the speed varies

StepTest procedureResultAction
1CHECKING THE GEAR SET

Check the crown wheel and pinion reduction gear (see OVERHAULING GEARBOXES Assembly 2110D)

In particular:

  • it should not be worn or damaged
  • there should not be excessive clearance
  • the ring gear fixings should not be slack
OK

Move onto step 2

Reduction gear damaged
  • Restore the clearance or, if necessary, replace the reduction gear

End of diagnosis

2CHECKING PLANET CARRIER

Check the wear of the planet carrier or the housing in the differential case (see OVERHAULING GEARBOXES Assembly 2110D)

OK

Move onto step 3

Differential case worn
  • Replace the differential casing

End of diagnosis

3CHECKING CORRECT OPERATION

Check that the fault is no longer present

OK

End of diagnosis

Fault persists

Incorrect selection of diagnostic procedure

Parts & tools for this job For 1997 Alfa Romeo 156

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.