Checking the door drip channel In particular, ascertain:

• no dirt, leaves etc. are present
• corner area is properly fitted (the seal should not cover the air intake hole)

Move onto step 2

• Clean the drip channel

End of diagnosis

• Refit the drip channel properly Op. 7055A14

End of diagnosis

Check the door seal In particular, check:

• absence of wrinkles in the seal
• condition of seal

Move onto step 3

• Fit the sealing strip correctly Op. 7010A34

End of diagnosis

Check the door is properly fitted. In particular, ascertain:

• door - compartment correctly aligned
• seal correctly bonded to the door

Move onto step 4

• Refit the door properly Op. 7010A14

End of diagnosis

Check the moving glass seal In particular, ascertain:

• the glass is properly closed
• the glass channel is correctly positioned
• the glass scraper is correctly positioned

Move onto step 5

• Refit the channel properly Op. 7010D18

End of diagnosis

• Refit the window mechanism and moving glass correctly Op. 7010D10

End of diagnosis

• Refit the glass scraper correctly Op. 7010D26

End of diagnosis

Check the drainage on the lower part of the doors.

In particular, ascertain:

• no dirt, leaves are present

Move onto step 6

• Clean the drains. If necessary refit correctly Op. 7010A46

End of diagnosis

Check that the fault is no longer present

End of diagnosis

Incorrect selection of diagnostic procedure