REAR FUEL DELIVERY LINE - R.R

Operation 1040B36 · FUEL SUPPLY/RETURN CIRCUIT PIPE

1.9 JTD 8V, 1.9 JTD 16V, 2.4 JTD 20V

Removing

- Position the vehicle on a lift.

Op. 7050A20 ONE-PIECE REAR SEAT CUSHION - R.R.

1. Undo the bolts (1a) and remove the access cover (1b) for the submerged pump assembly complete with level gauge.

1. Disconnect the rapid connector for the rear fuel supply pipe, submerged pump assembly side complete with level gauge.

1. Position a hydraulic jack with a suitable tool for supporting the fuel tank.

2. Undo the bolts (2a) fixing the fuel tank support belts (2b).

- Lower the fuel tank as far as necessary to gain access to the clip securing the rear pipe delivering fuel to the body.

1. Disconnect the rapid connector for the rear fuel supply pipe, front fuel supply pipe side.

2. Remove the rear fuel delivery pipe (2a) after releasing it from fastenings (2b).

Refitting

- Refit the rear fuel delivery pipe to its seat and secure.

- Connect the rapid connector for the rear fuel supply pipe, front fuel supply pipe side.

- Secure the rear fuel delivery pipe with the fastening collars located under the fuel tank.

- Place the fuel tank in position and secure it tightening the bolts to the recommended torque.

- Remove the hydraulic jack with the suitable tool for supporting the fuel tank.

- Connect the rapid connector for the rear fuel supply pipe, submerged pump assembly side complete with level gauge.

- Place the access cover to the submerged pump assembly complete with level gauge back in its housing and secure it using the bolts.

Op. 7050A20 ONE-PIECE REAR SEAT CUSHION - R.R.

- Remove the vehicle from the lift.